Mobile   |   Mail   |   Language:
  • 电话咨询

  • 075528068986
Solutions Home>>Solutions
Gymnasium wireless calling system

cafe shop cafe shop calling system


When you are exercising in the gymnasium, and you want to call the coach. The only way is shouting loudly?

Now, we have a better way to call him.

The wireless calling system is easily used in gymnasium. Put the transmitting caller beside each equipment, and the coach just wear the wrist watch receiver. When the customer needs service, he just presses the calling button, the caller will transmit a wirelss signal to service desk and coach's watch. Then the coach can easily read which one needs service and get there quickly.

This system uses RF wireless technology, which makes the system easily installed. It dones't need wires. Just put the caller which is power by battery on the talbe that is ok.


gymnasium calling system

Related products

Category Model Photo Name Memo

Wireless host / server


ZJ-40D 99 channel desktop wireless calling receiver for service desktop
ZJ-41C 99 channel watch calling receiver wrist watch receiver for waiter

Wireless caller


YK500-1E 1-button desktop caller stick on the wall
TSYK200-1 1-button waterproof caller tie on the pole
... ... more wireless caller buttons please refer to other caller
Repeater ZZQ8 Wireless repeater If the place is big, and the remote distance is not enough, please add the repeater.

Installation & Using

1/ Receiver --- Put the wireless calling receiver (server) on the service desk and connect to the power. The walling calling receiver is hung up on the wall or ceiling where easy to read.

2/ Watch receiver --- waiter (or waitress) wears the wrist watch receiver which can vibration when receives signal from customer.

3/ Transmitting caller --- Put the caller on each table. The caller is powered by batteries. Also can stick the caller on the wall where the customer can get it easily.

4/ Repeater --- If the service place is too big to receive the signal, please add the repeater on the way transmitting.

5/ Programing --- The transmitting caller and receiving server are paired by learning code. End user can do it by themselves. The number of caller can be defined to the table number.

6/ Menu card --- Menu or advertisment can be put in the card.

For more instruction, please refer to the user manual.

  ©2010 CHN SMART LIMITED - 粤ICP备08118273号 Copyright / Designed by: Albert Tel: +86-755-2806 8986 facebook  twitter